Spray Polyurethane Foam - BARTWAL ENGINEERING INSULATION PVT LTD

The Spray Polyurethane Foam uses the insulation technology which can be defined as a state of the art procedure that is making a consistent growth in the industrial, non-traditional, residential and commercial fields. In this modern era, this type of insulation method is getting used in place of fiberglass and cellulose which were previously used. These foams can be classified as closed cell foam or open cell foam. Polyurethane foam is mainly used in various building and household installation purposes. Polyurethane is mainly of two types which generally depend on the areas where these are applied like the rigid foam and spray foam. The application of Spray foam is quite affordable when compared with the other form and thus, it is gaining more and more importance nowadays.
 
What is Polyurethane foam?

This can be defined as an insulation material which comprises of high thermal resistance power. This takes place as the gas present in it has lower conductivity. These are also available in liquid form but are generally used with the help of spraying equipment. The gas which is used here can be HCFC or hydro chlorofluorocarbons which are again used with an R value range that measures up to R 7 to R 8 per inch. The above mentioned R value mainly deteriorates with time through a particular process known as thermal drift. As these low conductive gas escapes in the air, therefore the previously present gas molecules replace the gases present in the insulation. This entire process starts after 2 years of the installation process.

The Spray Polyurethane Foam is relatively easy to use as it can mold into the surface form and therefore, it is also known as foamed in application. Majority of spray foam which is produced nowadays comprises of non CFC gas as their main foaming material. As these are less effective in nature, therefore they pose less threat to the environment or the ozone layer. These can be easily used in high temperature areas. Carbon dioxide is yet another important agent which is used for certain foams which are known for their low density.

For  Spray Polyurethane Foam and Chemical Water Proofing there are certain important equipment and also the help of expert personnel which are a must. The foams which have high density have some low expanding capabilities. On the other hand, the low density foams can expand at a rapid rate when applied in the cavity sealing of the walls. On the other hand, too much expansion in the wall’s surface can give rise to further damage. Therefore, special guidance of expert professionals is a must in this regard.

Using these foams is surely going to help the home owners in various ways. As these do not contain any formaldehyde, therefore, these are eco friendly in nature. It is also not going to damage the ozone layer. It is also use for eliminating air infiltration inside the household. These foams are quite effective in nature and are also available at cost effective ranges through online stores. Always opt for the reliable companies who are well associated with this field for some time now.

Spray Roof Insulation

Spray Foam Insulation For Roofs 

Insulated Roofing 

SPF Roofing 

Spray Polyurethane Foam Roofing 

SPF Roofing System 

Spray Foam Attic Insulation 

Follow us G+